|Posted by Wipe Me Down on December 2, 2015 at 9:40 PM|
This is a beautiful automobile.
The 1981 Rolls Royce Silver Spirit pictured below is more than enough vehicle to capture the attention of it's unsuspecting audience. As I posed to have my likeness immortalized while in the presence of this legend, I noticed several curious Richmonders who couldn’t seem to break their respective gazes. It could've been the Silver Spirit's stunning lines, or the alluring pose of its takeoff-ready flying lady, or maybe it was the entire ambiance of the antique luxury car framed by the glowing marquee lights of the capital city's historic Carpenter Center that captured the onlooker's eyes. What I’m certain of, is that no one was paying attention to the humble Captain Lo of the Starship Wipe Me Down who graciously restored this classic to it's original showroom shine of yesteryear.
Wipe Me Down!
#Detailed #WipeMeDownVA #RollsRoyce #SilverSpirit #WipedDown
|Posted by Wipe Me Down on December 16, 2014 at 1:45 PM|
With the nasty weather we're having today, I thought I'd share with you guys one of the things I've noticed during my adventures in detailing. Many times customers complain of impared visibility during the rain because of ineffective wipers and inquire about replacing them. What I've noticed a good amount of the time is that the wipers dont need to be replaced just yet, they just need to be cleaned. And if you've never cleaned them before, theres a good chance it needs to be done now. Before you replace your wipers, follow the steps below to clean them....it may just make a difference!
• Using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent, wipe both sides of the rubber wiper blade.
• Be sure to wash the windshield thoroughly when you clean the wiper blades. Dirt, bugs, road grime, sap, and a buildup of car wax may additionally contribute to ineffective wipers.
|Posted by Wipe Me Down on January 12, 2011 at 5:03 PM|
I was born and raised right here in Richmond, VA so I know very well how much us Central Virginian's love a sparkling finish on our rides. But this can only be accomplished after paint problems are corrected. Of course, we at Wipe Me Down Mobile Detailing would love to handle this task for you, but for all you diy'ers out there, here's a small guide to assist you in getting your ride to look its best.
Its important to clean your vehicle out of direct sunlight for best results.
Clean the tires and wheel wells using an all purpose cleaner, a good stream of high pressure water, and tire brush if needed. After you've finished washing your car, apply a vinyl dressing to take away the well's dullness.
(The top clearcoat is only about 1.5 to 2 mils thick from the factory, and when it gets scratched or abraded it refracts light and the color coat underneath doesn't shine through clearly. It's like looking through a scratched or foggy lens.)
Use a carwash soap, not a household detergent, and work in sections, from the top down. The lower panels tend to accumulate more abrasive dirt. To do a final rinse, remove the spray head from the hose and flood the finish. The water will tend to run off in sheets, minimizing spotting. Dry with a microfiber towel.
Now is the perfect time to evaluate your finish. If you notice contaminants in your paint, your next step should be to clay your paint. Stains can be attacked with a good clearcoat-safe cleaner. Minor scratches and swirls can be polished off with clearer waxes or mild polish. The worse the problem, the more aggressive the cleaner needed. Start off with the least abrasive product and gradually move to coarser cleaners as required.
Polish first if necessary, then follow with waxing. Be sure to include doorjambs, and the areas beneath door hinges and behind bumpers. Minor blemishes may be neutralized by wrapping a cotton cloth around your index finger and burnishing the polish into the finish.
Polish not only gives the finish its gloss, but it feeds the paint with oils to prevent it from drying out. Polymers in the polish fill in minute scratches in the clearcoat layer, restoring its clarity. If you machine-buff the polish/wax to a high luster, go with an orbital rather than a rotary model, which would be more likely to burn the paint. Treat the plastic chrome on today's cars as if it were a painted surface and protect it with a light coat of wax.
Scratches that go through the clearcoat into the pigment must be repaired professionally.
Avoid getting wax or polish on rubber and flat black plastic areas (clean them with a nongloss product), door handles and emblems. If you do get a wax stain on rubber trim, spray it with a mist-and-wipe product and wipe it down with a terry cloth towel.
If you get a polish/wax residue around emblems or in crevices, break out the cotton swabs and toothbrushes. It's important that you first wet the area with a mist-and-wipe product such as Meguiar's Quick Detailer. Never brush on a dry surface.
Apply tire dressing; to get a gloss finish let the product soak in, or for a matte look wipe it on and off with a cotton cloth. Be sure the tires are dry before driving off, or you'll spatter your nice shiny finish. Wipe any dirt or excess tires shine from rims.
Lastly, clean glass or plastic gauge lenses with a glass or plastic cleaner, not wax.
Now step back and look at a job well done.
|Posted by Wipe Me Down on January 3, 2011 at 12:09 PM|
"Keeping your vehicle clean by frequenting a professional car wash every 10 days is one of the best defenses in protecting its finish," said Mark Thorsby, ICA executive director
This is especially true during the winter months where we encounter snow, sleet, freezing temperatures, sand and salt. Working in conjunction with each other, these factors have the potential to wreak havoc on your vehicle's finish. Its always easiest and best to have your vehicle professionally cleaned. However, here are a few tips if your only recourse is to do it youself:
Incorporating these tips into your normal at-home car wash routine will be a great help to your vehicle in between professional visits.
|Posted by Wipe Me Down on January 3, 2011 at 10:05 AM|
Salt is hyroscopic (attracts water) and very corrosive to metal when it combines with the water it attracts. The product of corrosion on metal is the familiar red-brown rust. Most of the metal on our vehicles today is protected by paint, wax or sealant, but as the finish on your vehicle gets roughened (via the effects of weather, sun, rock chips, scratches, minor dings, etc.), the salt can easily be allowed to take full effect if it is left unattended.
Keeping your vehicle as clean as possible during the winter will go a long way to cut down the damage done by salt and sand. Its a very good idea to have your vehicle washed at least every 10 days during the winter months and as soon as possible after it snows. Here are a few other tips to remember:
• Wash your vehicle when the temperature reaches at least 40 degrees F.
• Plan to wash your vehicle well before sunset to allow it to dry completely before freezing evening temperatures begin.
• Avoid driving through large puddles of standing water where road salt collects.
• Repair paint chips that are larger than the tip of a pen to avoid corrosion.
• Wax and seal your vehicle every six months or less to give your vehicle a strong protective coating.
Follow these tips and you should be well on your way to fighting the battle against winter road salts.
|Posted by Wipe Me Down on|
Here are a few pictures of an awesome looking Jeep that was recently serviced by the detail professionals at Wipe Me Down Mobile Detailing in Tuckahoe, VA.